Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K2500, 6.0 UREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTMEMORY MODULESADJUSTABLE PEDAL SYSTEMSPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Chevrolet Suburban K2500, 6.0 U
Fastener Tightening Specifications
2006 Chevrolet Suburban K2500, 6.0 USECTION Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Accelerator Pedal Assembly Nuts | 9 N.m | 80 lb in |
| Brake Pedal Pivot Nut | 30 N.m | 22 lb ft |
| Brake Pedal Position Sensor Bolt | 9 N.m | 80 lb in |
| EAP Bracket to Booster Nuts | 25 N.m | 18 lb ft |
| EAP Bracket Top Bolt | 25 N.m | 18 lb ft |
| I/P Carrier to I/P Reinforcement Brace Upper Nut | 22 N.m | 16 lb ft |
| I/P Reinforcement Brace to EAP Bracket Lower Bolt | 25 N.m | 18 lb ft |
| Transmission Range Selector Cable Support Bolt | 10 N.m | 89 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.