SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K2500, 6.0 UREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSWIRING DIAGRAMSOEM CONNECTOR END VIEWS (4 OF 5)OBJECT DETECTION CONNECTOR END VIEWSREAR OBJECT SENSOR CONTROL MODULE CONNECTOR END VIEW
2006 Chevrolet Suburban K2500, 6.0 U

Rear Object Sensor Control Module Connector End View

2006 Chevrolet Suburban K2500, 6.0 USECTION Rear Object Sensor Control Module Connector End View
Rear Object Sensor Control Module

GM599191Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12124957
  • 26-Way F Amp MODU (BK)
Pin Wire Color Circuit No. Function
1 YE 2375 LR Corner Object Sensor Signal
2 OG 2376 LR Middle Object Sensor Signal
3 D-GN 2377 RR Middle Object Sensor Signal
4 RD 2378 RR Corner Object Sensor Signal
5 D-BU 2374 Object Sensor Supply Voltage
6 GY 2379 Object Sensor Low Reference
7-11 - - Not Used
12 BK 1250 Ground (Escalade EXT)
BK 1450 Ground (Except Escalade EXT)
13 PK 739 Ignition 1 Voltage
14 GY 2555 Rear Parking Assist Disable Input
15 L-GN 24 Backup Lamp Supply Voltage
16 L-GN 2525 Rear Parking Assist Diagnostic Connector Signal
17 - - Not Used
18 D-GN/WH 817 Vehicle Speed Signal
19-21 - - Not Used
22 L-BU 2380 Rear Parking Assist Chime Signal
23 WH 2370 Telltale Assembly Supply Voltage
24 GY 2373 Red Indicator Control
25 D-BU 2372 Center Amber Indicator Control
26 OG 2371 Left Amber Indicator Control
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.