Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K1500, 5.3 ZREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 946 (POWER SEAT SYSTEM)COMPONENT LOCATORPOWER SEAT CONNECTORSMEMORY SEAT MODULE C4 (AN3)
2006 Chevrolet Suburban K1500, 5.3 Z
Memory Seat Module C4 (AN3)
2006 Chevrolet Suburban K1500, 5.3 ZSECTION Memory Seat Module C4 (AN3)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Memory Seat Module C4 (AN3) Connector Parts Information
Connector Part Information
|
Terminal Part Information
|
Memory Seat Module C4 (AN3) Connector Terminal Identification
| Pin | Wire Color | Circuit No. | Function |
|---|---|---|---|
| 1 | PU | 767 | Driver Seat Lumbar Motor Down Control |
| 2 | TN | 768 | Driver Seat Lumbar Motor Up Control |
| 3-8 | - | - | Not Used |
| 9 | PU | 5130 | Adjustable Pedal Motor Forward Control (JF4) |
| 10 | OG/BK | 5129 | Adjustable Pedal Motor Rearward Control (JF4) |
| 11 | - | - | Not Used |
| 12 | D-BU | 611 | Driver Seat Lumbar Motor Forward Control |
| 13 | PK | 610 | Driver Seat Lumbar Motor Rearward Control |
| 14 | PK | 2480 | Ground (Except KB6) |
| 15 | L-GN | 276 | Driver Seat Recline Motor Forward Control |
| 16 | L-BU | 277 | Driver Seat Recline Motor Rearward Control |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.