SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K1500, 5.3 ZREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2156 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS PART 2)ELECTRONIC BRAKE CONTROL MODULE (EBCM) (HP2)
2006 Chevrolet Suburban K1500, 5.3 Z

Electronic Brake Control Module (EBCM) (HP2)

2006 Chevrolet Suburban K1500, 5.3 ZSECTION Electronic Brake Control Module (EBCM) (HP2)
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Electronic Brake Control Module (EBCM) (HP2) Connector End View
GM1862109Courtesy of GENERAL MOTORS CORP.
Electronic Brake Control Module (EBCM) (HP2)

Pin Wire Circuit Function
1 5 RD/BK 1742 Battery Positive Voltage
2 0.5 BN 882 Wheel Speed Sensor (WSS) - Right Rear Signal
3 0.5 GY/BK 7128 12-Volt Reference
4 0.5 GY/BK 7127 12-Volt Reference
5 0.5 TN 884 Wheel Speed Sensor (WSS) - Left Rear Signal
6 0.5 D-GN 872 Wheel Speed Sensor (WSS) - Right Front Signal
7 0.5 YE 6046 Steering Angle Sensor - Phase A
8 0.5 TN 6048 Steering Angle Sensor - Index
9 0.5 RD/BK 442 Brake Master Cylinder Piston Position Sensor Signal
10 - - Not Used
11 0.5 L-BU/WH 6311 Brake Applied Signal
12 0.5 L-BU 5986 Serial Data Communication Enable
13 5 BK 2150 Ground
14 0.5 PK 439 Ignition Voltage
15 0.5 OG/BK 6045 Low Reference
16 0.5 L-GN 6043 Steering Angle Sensor Signal
17 0.5 GY/WH 7065 12-Volt Reference
18 0.5 TN 948 Ignition Voltage
19 0.5 GY 6044 5-Volt Reference
20 0.5 D-BU 6047 Steering Angle Sensor - Phase B
21 0.5 L-BU 6106 PTLAN -
22 0.5 L-BU/WH 6106 PTLAN -
23 0.5 YE 2501 High Speed GMLAN Serial Data Bus -
24 0.5 TN 2501 High Speed GMLAN Serial Data Bus -
25 3 RD/BK 442 Battery Positive Voltage
26-27 - - Not Used
28 0.5 GY/WH 7064 12-Volt Reference
29 0.5 L-BU/BK 830 Wheel Speed Sensor (WSS) - Left Front Signal
30 0.5 TN/WH 950 Yaw Rate and Lateral Acceleration Sensor Ground
31 0.5 RD/BK 442 5-Volt Reference
32 0.5 D-GN/WH 817 Vehicle Speed Signal
33 0.5 D-BU 6105 PTLAN +
34 0.5 D-BU/WH 6105 PTLAN +
35 0.5 RD/BK 442 Brake Master Cylinder Piston Position Sensor Signal
36 0.5 TN/BK 2500 High Speed GMLAN Serial Data Bus +
37 0.5 YE/BK 2500 High Speed GMLAN Serial Data Bus +
38 3 BK 2150 Ground
Connector Part Information 
  • OEM: 13528146
  • Service: See Catalog
  • Description: 38-Way F Sealed (BK)
Terminal Part Information 
  • Pins: 1, 13
  • Terminal/Tray: 7116-4142-02/10
  • Core/Insulation Crimp: D/3
  • Release Tool/Test Probe: 12094430/J-35616-42 (RD)
  • Pins: 2-9, 11-12, 14-24, 28-37
  • Terminal/Tray: 7116-3703-02/14
  • Core/Insulation Crimp: 9/9
  • Release Tool/Test Probe: J-38125-215A/J-35616-64B (L-BU)
  • Pins: 25, 38
  • Terminal/Tray: 15304720/19
  • Core/Insulation Crimp: 4/5
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.