SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K1500, 5.3 ZREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2069 (COMPONENT LOCATIONS - ELECTRICAL CENTER IDENTIFICATION VIEWS)ELECTRICAL CENTER IDENTIFICATION VIEWSFUSE BLOCK - I/P X2
2006 Chevrolet Suburban K1500, 5.3 Z

Fuse Block - I/P X2

2006 Chevrolet Suburban K1500, 5.3 ZSECTION Fuse Block - I/P X2
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Junction Block - Right I/P X2 Connector End View
GM1667401Courtesy of GENERAL MOTORS COMPANY
Fuse Block - I/P X2

Pin Wire Circuit Function
A1 0.8 RD/WH 6040 Battery Positive Voltage (E52)
0.8 RD/WH 6040 Battery Positive Voltage (AZ3 or A95)
A2-A3 - - Not Used
A4 2 RD/WH 2040 Battery Positive Voltage
A5-A6 - - Not Used
A7 2 RD/WH 4740 Battery Positive Voltage (KB6)
B1 2 RD/WH 1240 Battery Positive Voltage
B2-B3 - - Not Used
B4 0.8 RD/WH 4840 Battery Positive Voltage (ARS and/or KA6)
0.8 RD/WH 4840 Battery Positive Voltage (ARS)
B5 0.35 RD/WH 840 Battery Positive Voltage (UD7)
B6 0.35 RD/WH 840 Battery Positive Voltage (E61)
B7 0.35 RD/WH 1140 Battery Positive Voltage
0.5 RD/WH 1140 Battery Positive Voltage (AN3 or HP2 with AG1)
Connector Part Information
  • Harness Type: Body
  • OEM Connector: 15467621
  • Service Connector: 19115663
  • Description: 14-Way F GT 150 280 Series (GY)

Terminal Part Information
  • Pins: A1 (AN3), B4 (without HP2), B7
  • Terminated Lead: 13575753
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-4A (PU)
  • Terminal/Tray: 15304711/8
  • Core/Insulation Crimp: Pins A1, B4, B7 (AN3) - 2/A
  • Core/Insulation Crimp: Pins B7 (without AN3) - E/A
  • Pins: A1 (without AN3), B4 (HP2)
  • Terminated Lead: 13575753
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-4A (PU)
  • Terminal/Tray: 15304711/8
  • Core/Insulation Crimp: 2/A
  • Pins: A4, A7, B1
  • Terminated Lead: Pins A4 - 13575754
  • Terminated Lead: Pins A7, B1 - 13575756
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-4A (PU)
  • Terminal/Tray: 15304713/19
  • Core/Insulation Crimp: Pins A4 - 4/4
  • Core/Insulation Crimp: Pins A7, B1 - F/D
  • Pins: B5, B6
  • Terminated Lead: 13575735
  • Release Tool: J-38125-553
  • Diagnostic Test Probe: J-35616-2A (GY)
  • Terminal/Tray: 12191812/19
  • Core/Insulation Crimp: C/A
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.