SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K1500, 5.3 ZREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2055 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - MEMORY SEAT MODULE (X5) TO YAW SENSOR)COMPONENT CONNECTOR END VIEWSSUNROOF SWITCH (CF5)
2006 Chevrolet Suburban K1500, 5.3 Z

Sunroof Switch (CF5)

2006 Chevrolet Suburban K1500, 5.3 ZSECTION Sunroof Switch (CF5)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
GM1283887Courtesy of
Connector Part Information
  • Harness Type: Sunroof
  • OEM Connector: 12103492
  • Service Connector: 89046705
  • Description: 8-Way F Receptacle 0.64 Series (BK)
Terminal Part Information
  • Terminated Lead: Service by Harness - See Part Catalog
  • Release Tool: J-38125-213
  • Diagnostic Test Probe: J-35616-64B (L-BU)
  • Terminal/Tray: 16-02-1110/20
  • Core/Insulation Crimp: H/H
Sunroof Switch (CF5)

Pin Wire Circuit Function
1 0.35 D-GN 2074 Sunroof Switch Express Signal
2 0.35 OG/BK 144 Sunroof Switch Open Vent Signal
3 0.35 BN/WH 230 Instrument Panel Lamp Dimming Control
4 0.35 L-BU 110 Sunroof Switch Close Signal
5 0.35 BK 1050 Ground
6 0.35 BN 100 Sunroof Switch Open Signal
7 - - Not Used
8 0.35 PK 2075 Sunroof Switch Close Vent Signal
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.