SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K1500, 5.3 ZREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2055 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - MEMORY SEAT MODULE (X5) TO YAW SENSOR)COMPONENT CONNECTOR END VIEWSRADIO X3 (UYS)
2006 Chevrolet Suburban K1500, 5.3 Z

Radio X3 (UYS)

2006 Chevrolet Suburban K1500, 5.3 ZSECTION Radio X3 (UYS)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
GM1715223Courtesy of
Connector Part Information
  • Harness Type: Instrument Panel
  • OEM Connector: 15489824
  • Service Connector: 15126711
  • Description: 20-Way F 64 Series (BK)
Terminal Part Information
  • Terminated Lead: 13327119
  • Release Tool: J-38125-215A
  • Diagnostic Test Probe: J-35616-64B (L-BU)
  • Terminal/Tray: SAIT-A03T-M064/14
  • Core/Insulation Crimp: P/P
Radio X3 (UYS)

Pin Wire Circuit Function
1 0.35 L-BU 5826 Left DVD Audio Signal (+)
2 0.35 PU 6979 DVD Audio Common
3 0.35 YE 2059 Auxiliary Audio Left Signal
4 0.35 PK/BK 5844 Video Bright Control
5 0.35 L-GN/BK 5845 Video Module Signal
6 0.35 OG/BK 5831 Remote Infra-Red Signal (+)
7 0.35 PU 2056 Auxiliary Video High Signal
8 - - Not Used
9 0.35 BARE 6976 DVD Video Drain Wire
10 0.35 D-GN 6975 Video Module Signal
11 0.35 WH 5828 Right DVD Audio Signal (+)
12 0.35 BARE 6980 DVD Audio Shield
13 0.35 WH 2058 Auxiliary Audio Right Signal
14 0.35 BARE 5345 Drain Wire
15 - - Not Used
16 0.35 TN/WH 5830 Remote Infra-Red Signal (-)
17 0.35 BARE 5346 Video Drain Wire
18-19 - - Not Used
20 0.35 WH/BK 5335 DVD Video Signal (-)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.