Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K1500, 5.3 ZREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1399 (REAR SUSPENSION SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Chevrolet Suburban K1500, 5.3 Z
Fastener Tightening Specifications
2006 Chevrolet Suburban K1500, 5.3 ZSECTION Fastener Tightening Specifications
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Jounce Bumper Mounting Nut - 2500 | 32 N.m | 24 lb ft |
| Lower Control Arm to Axle Bolts | 160 N.m | 118 lb ft |
| Lower Control Arm to Frame Bolts | 140 N.m | 103 lb ft |
| Rear Axle Tie Rod End Bolt | 140 N.m | 103 lb ft |
| Shackle to Frame Bracket Nut - 2500 | 95 N.m | 70 lb ft |
| Shackle to Spring Nut - 2500 | 200 N.m | 148 lb ft |
| Shock Absorber Nuts | 115 N.m | 85 lb ft |
| Spring to Front Hanger Nut - 2500 | 200 N.m | 148 lb ft |
| Stabilizer Shaft Insulator Clamp Bolts | 32 N.m | 24 lb ft |
| Stabilizer Shaft Link Nuts | 75 N.m | 55 lb ft |
| U-Bolt Nut - 2500 | 100 N.m | 74 lb ft |
| Upper Control Arm Bolt at the Frame | 160 N.m | 118 lb ft |
| Upper Control Arm at the Rear Axle | 160 N.m | 118 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.