Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K1500, 5.3 ZREPAIR AND DIAGNOSISBODY & FRAMESEATSSEAT SYSTEMREPAIR INSTRUCTIONSMODULE REPLACEMENT - SEAT CLIMATE CONTROL - FRONT SEATREMOVAL PROCEDURE

2006 Chevrolet Suburban K1500, 5.3 Z

Removal Procedure

2006 Chevrolet Suburban K1500, 5.3 ZSECTION Removal Procedure

Fig 1: View Of Seat Climate Control Module Bracket & Screw

Courtesy of GENERAL MOTORS CORP.

Remove the front seat cushion assembly. Refer to Seat Cushion Frame Replacement - Front .
Disconnect the climate control module electrical connectors.
Remove the screw (1) retaining the module bracket to the seat cushion frame.
Remove the bracket and module assembly from the cushion assembly.

Fig 2: View Of Seat Climate Control Module & Screws

Courtesy of GENERAL MOTORS CORP.

Remove the screws (1) retaining the module (2) to the module bracket (3).

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.