Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN K1500, 5.3 ZREPAIR AND DIAGNOSISBODY & FRAMESEATSSEAT SYSTEMDIAGNOSTIC INFORMATION AND PROCEDURESSCAN TOOL DATA LIST
2006 Chevrolet Suburban K1500, 5.3 Z
Scan Tool Data List
2006 Chevrolet Suburban K1500, 5.3 ZSECTION Scan Tool Data List
Driver Seat Module
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Power Seat Operating Conditions: Ignition Off Heated Seat Operating Conditions: Engine Running |
|||
| Battery Voltage | Input/Output | Volts | 12-14 |
| Driver Heated Seat Status | Input/Output | Off/Low/Med/High | Off |
| Driver Seat Heat Zone | Input/Output | Off/Back Only/Back and Cushion | Off |
| Drvr. Seat Heat Sensor | Sensor Data | Volts | 0.0-5.0 |
| Front Vertical Downward Switch | Input/Output | Active/Inactive | Inactive |
| Front Vertical Motor Downward | Input/Output | Active/Inactive | Inactive |
| Front Vertical Motor Upward | Input/Output | Active/Inactive | Inactive |
| Front Vertical Position | Sensor Data | Counts | 0.0-65535 |
| Front Vertical Upward Switch | Input/Output | Active/Inactive | Inactive |
| Horizontal Forward Switch | Input/Output | Active/Inactive | Inactive |
| Horizontal Lumbar Position | Sensor Data | Counts | 0.0-65535 |
| Horizontal Motor Forward | Input/Output | Active/Inactive | Inactive |
| Horizontal Motor Rearward | Input/Output | Active/Inactive | Inactive |
| Horizontal Position | Sensor Data | Counts | 0.0-65535 |
| Horizontal Rearward Switch | Input/Output | Active/Inactive | Inactive |
| Lumbar Forward Switch | Input/Output | Active/Inactive | Inactive |
| Lumbar Motor Forward | Input/Output | Active/Inactive | Inactive |
| Lumbar Motor Rearward | Input/Output | Active/Inactive | Inactive |
| Lumbar Rearward Switch | Input/Output | Active/Inactive | Inactive |
| Mem 1 Front Vertical Value | Memory Data | Counts | 0.0-65535 |
| Mem 1 Horizontal Value | Memory Data | Counts | 0.0-65535 |
| Mem 1 Rear Vertical Value | Memory Data | Counts | 0.0-65535 |
| Mem 1 Recline Value | Memory Data | Volts | 0.0-5.0 |
| Mem 2 Front Vertical Value | Memory Data | Counts | 0.0-65535 |
| Mem 2 Horizontal Value | Memory Data | Counts | 0.0-65535 |
| Mem 2 Rear Vertical Value | Memory Data | Counts | 0.0-65535 |
| Mem 2 Recline Value | Memory Data | Volts | 0.0-5.0 |
| Passenger Heated Seat Status | Input/Output | Off/Low/Med/High | Off |
| Psgr. Seat Heat Sensor | Sensor Data | Volts | 0.0-5.0 |
| Psgr. Seat Heat Zone | Input/Output | Off/Back Only/Back and Cushion | Off |
| Rear Vertical Downward Switch | Input/Output | Active/Inactive | Inactive |
| Rear Vertical Motor Downward | Input/Output | Active/Inactive | Inactive |
| Rear Vertical Motor Upward | Input/Output | Active/Inactive | Inactive |
| Rear Vertical Position | Sensor Data | Counts | 0.0-65535 |
| Rear Vertical Upward Switch | Input/Output | Active/Inactive | Inactive |
| Recline Forward Switch | Input/Output | Active/Inactive | Inactive |
| Recline Motor Forward | Input/Output | Active/Inactive | Inactive |
| Recline Motor Rearward | Input/Output | Active/Inactive | Inactive |
| Recline Position | Sensor Data | Volts | 0.0-5.0 |
| Recline Rearward Switch | Input/Output | Active/Inactive | Inactive |
| Software Design Suffix | Module Information | Numeric | Varies |
| Software Part Number | Module Information | Numeric | Varies |
| Torso Inward Switch | Input/Output | Active/Inactive | Inactive |
| Torso Motor Inward | Input/Output | Active/Inactive | Inactive |
| Torso Motor Outward | Input/Output | Active/Inactive | Inactive |
| Torso Outward Switch | Input/Output | Active/Inactive | Inactive |
| Torso Position | Sensor Data | Counts | 0.0-65535 |
| Vertical Lumbar Position | Sensor Data | Counts | 0.0-65535 |
Driver Door Module
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Power Seat Operating Conditions: Ignition Off Heated Seat Operating Conditions: Engine Running |
|||
| Back Only Heat Indicator | Inputs | On/Off | Off |
| Back Only Heat Indicator | Outputs | On/Off | Off |
| Back Only Heat Switch | Inputs | Active/Inactive | Inactive |
| Heat Indicator High | Inputs | On/Off | Off |
| Heat Indicator High | Outputs | Active/Inactive | Inactive |
| Heat Indicator Low | Inputs | On/Off | Off |
| Heat Indicator Low | Outputs | On/Off | Off |
| Heat Indicator Medium | Inputs | On/Off | Off |
| Heat Indicator Medium | Outputs | On/Off | Off |
| Heated Seat Switch | Inputs | Active/Inactive | Inactive |
| Memory Switch | Inputs | Memory 1/Memory 2/Both/Idle | Idle |
Passenger Door Module
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Operating Conditions: Engine Running | |||
| Back Only Heat Indicator | Inputs | On/Off | Off |
| Back Only Heat Indicator | Outputs | On/Off | Off |
| Back Only Heat Switch | Inputs | Active/Inactive | Inactive |
| Heat Indicator High | Inputs | On/Off | Off |
| Heat Indicator High | Outputs | On/Off | Off |
| Heat Indicator Low | Inputs | On/Off | Off |
| Heat Indicator Low | Outputs | On/Off | Off |
| Heat Indicator Medium | Inputs | On/Off | Off |
| Heat Indicator Medium | Outputs | On/Off | Off |
| Heated Seat Switch | Inputs | Active/Inactive | Inactive |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.