SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 927 (DATA COMMUNICATION SYSTEM)VISUAL IDENTIFICATIONDATA COMMUNICATION CONNECTORSAUXILIARY BODY CONTROL MODULE (XBCM) C1 (EXPORT)
2006 Chevrolet Suburban C2500, 6.0 U

Auxiliary Body Control Module (XBCM) C1 (Export)

2006 Chevrolet Suburban C2500, 6.0 USECTION Auxiliary Body Control Module (XBCM) C1 (Export)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Auxiliary Body Control Module (XBCM) C1 (Export) Connector End View
GM73156Courtesy of GENERAL MOTORS CORP.
Auxiliary Body Control Module (XBCM) C1 (Export) Connector Parts Information

Connector Part Information 
  • OEM: 12110088
  • Service: 15306210
  • Description: 24-Way F Micro-Pack 100 Series (GY)
Terminal Part Information 
  • Terminal/Tray: 12146447/3
  • Core/Insulation Crimp: E/C
  • Release Tool/Test Probe: 12031876-1/J-35616-6 (BN)
Auxiliary Body Control Module (XBCM) C1 (Export) Connector Terminal Identification

Pin Wire Color Circuit No. Function
A1 BK 1050 Ground
A2 RD/WH 2640 Battery Positive Voltage
A3 D-GN 5060 Low Speed GMLAN Serial Data
A4-A6 - - Not Used
A7 BK/WH 1851 Ground
A8 L-BU 187 Rear Fog Lamp Switch Signal
A9 - - Not Used
A10 PK 7141 Trailer Connected Signal Trailer
A11 - - Not Used
A12 YE 1618 Trailer Left Rear Turn/Stop Lamp Supply Voltage
B1 L-BU 1320 CHMSL Supply Voltage
B2 PK 239 Ignition 1 Voltage
B3-B10 - - Not Used
B11 D-GN 1619 Trailer Right Rear Turn/Stop Lamp Supply Voltage
B12 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.