Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 839 (POWER STEERING SYSTEM)DIAGNOSTIC INFORMATION AND PROCEDURESSCAN TOOL DATA LIST
2006 Chevrolet Suburban C2500, 6.0 U
Scan Tool Data List
2006 Chevrolet Suburban C2500, 6.0 USECTION Scan Tool Data List
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Not all listed data parameters are available on all vehicles.
Scan Tool Data List
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Operating Conditions: Ignition ON/ engine ON/ steering wheel centered/ no force applied to steering wheel. | |||
| Actual Motor Current | Data Display | Amps | 0.0 |
| Battery Voltage | Data Display | Volts | 14.3 |
| Desired Motor Current | Data Display | Amps | 0.0 |
| Ignition Voltage | Data Display | Volts | 14.3 |
| Limiting Motor Current | Data Display | Amps | 58 amps |
| Motor Voltage + | Data Display | Volts | 0.0 |
| Motor Voltage - | Data Display | Volts | 0.0 |
| Torque Sensor Amplified | Data Display | N.m or lb ft | 0.00 |
| Torque Sensor Main | Data Display | N.m or lb ft | 0.00 |
| Torque Sensor Sub | Data Display | N.m or lb ft | 0.00 |
| Tuning Profile | Data Display | Numeric 1-8 | Varies |
| Vehicle Speed | Data Display | km/h or mph | 0 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.