SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 731 (POWER ROOF SYSTEM)COMPONENT LOCATORPOWER ROOF SYSTEMS CONNECTOR END VIEWS
2006 Chevrolet Suburban C2500, 6.0 U

Power Roof Systems Connector End Views

2006 Chevrolet Suburban C2500, 6.0 USECTION Power Roof Systems Connector End Views
WARNING: This page is about a different car, the 2006 GMC Sierra and 2006 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Sunroof Control Module C1

GM62450Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12052856
  • 4-Way F Metro Pack 280 Series (BK)
Pin Wire Color Circuit No. Function
A OG 3840 Battery Positive Voltage
B D-GN 127 Sunroof Motor Open Control
C L-GN 129 Sunroof Motor Close Control
D BK 1050 Ground
Sunroof Control Module C2

GM783213Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 39-01-2080
  • 8-Way F Mini-Fix Jr. Molex (NA)
Pin Wire Color Circuit No. Function
1 D-GN 5814 Low Reference
2 - - Not Used
3 YE/BK 5034 Hall Effect Sensor 1 Signal
4 TN 5124 Hall Effect Sensor 2 Signal
5 GY - Manufacturing Mode
6 D-BU 1353 RAP Supply Voltage
7 OG 110 Sunroof Switch Close Signal
8 BN 100 Sunroof Switch Open Signal
Sunroof Motor

GM828342Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 13799217
  • 5-Way M Tyco/AMP (BK)
Pin Wire Color Circuit No. Function
1 D-GN 127 Sunroof Motor Open Control
2 YE/BK 5034 Hall 2 Sensor
3 D-GN 5814 Low Reference
4 TN 5124 Hall 1 Sensor
5 L-GN 129 Sunroof Motor Close Control
Sunroof Switch

GM62469Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12064998
  • 8-Way F Metri-Pack 280 Series (BK)
Pin Wire Color Circuit No. Function
A OG 110 Sunroof Switch Close Signal
B BN/WH 230 Instrument Panel Lamps Dimming Control
C BK 1050 Ground
D - - Not Used
E BN 100 Sunroof Switch Open Signal
F D-BU 1353 RAP Supply Voltage
G-H - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.