Engine Controls Component Views

2006 Chevrolet Suburban C2500, 6.0 USECTION Engine Controls Component Views
WARNING: This page is about a different car, the 2006 GMC Sierra and 2006 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Powertrain Control Module (PCM) Component View
GM1542733Courtesy of GENERAL MOTORS CORP.
Callouts For Fig 1

Callout Component Name
1 Fuse Block - Underhood
2 Battery - Left
3 Powertrain Control Module (PCM)
4 Battery - Right (8Y9/TP2)
Fig 2: View Of Generator - 4.3L
GM405657Courtesy of GENERAL MOTORS CORP.
Callouts For Fig 2

Callout Component Name
1 Air Cleaner Assembly
2 Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor
3 Air Inlet Tube
4 Generator
Fig 3: Left Front of Engine
GM1542735Courtesy of GENERAL MOTORS CORP.
Callouts For Fig 3

Callout Component Name
1 Ignition Control Module (ICM)
2 Throttle Position (TP) Sensor
3 Central Sequential Fuel Injection (Central SFI)
4 Idle Air Control (IAC) Valve
5 Engine Coolant Temperature (ECT) Sensor
Fig 4: Right Front of the Engine
GM1542737Courtesy of GENERAL MOTORS CORP.
Callouts For Fig 4

Callout Component Name
1 Evaporative Emission (EVAP) Canister Purge Solenoid
2 Ignition Coil
3 Manifold Absolute Pressure (MAP) Sensor
4 Crankshaft Position (CKP) Sensor
Fig 5: Rear of the Engine
GM1542739Courtesy of GENERAL MOTORS CORP.
Callouts For Fig 5

Callout Component Name
1 Camshaft Position (CMP) Sensor
2 Knock Sensor (KS)
3 Engine Oil Pressure (EOP) Sensor
Fig 6: Heated Oxygen Sensors Component View
GM209624Courtesy of GENERAL MOTORS CORP.
Callouts For Fig 6

Callout Component Name
1 HO2S Bank 2 Sensor 2
2 HO2S Bank 1 Sensor 2
3 HO2S Bank 1 Sensor 1
4 HO2S Bank 2 Sensor 1
Fig 7: Chassis Mounted Fuel/EVAP Controls - 10 Series
GM1606458Courtesy of GENERAL MOTORS CORP.
Callouts For Fig 7

Callout Component Name
1 Fuel Pump and Sender Assembly
2 Evaporative Emissions (EVAP) Canister Vent Solenoid
Fig 8: Fuel Tank Pressure (FTP) Sensor and Fuel Pump and Sender Assembly Component View
GM235167Courtesy of GENERAL MOTORS CORP.
Callouts For Fig 8

Callout Component Name
1 Fuel Tank
2 Fuel Tank Pressure (FTP) Sensor Connector
3 Fuel Level Sensor
4 Fuel Pump and Sender Assembly
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.