SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 633 (CELLULAR COMMUNICATION SYSTEM)DIAGNOSTIC INFORMATION AND PROCEDURESSCAN TOOL DATA DEFINITIONS
2006 Chevrolet Suburban C2500, 6.0 U

Scan Tool Data Definitions

2006 Chevrolet Suburban C2500, 6.0 USECTION Scan Tool Data Definitions
WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Module Information-Software Version:  This displays the 3-digit number of the software version used on the OnStar® VCIM.

Module Information Hardware Version:  This displays the 1-digit number of the hardware version used on the Onstar® VCIM.

Module Information-Julian Date of Build:  This displays the day of the year the module was built.

Module Information-Year Module Built:  This displays the year the module was built.

Module Information-8-Digit GM Part Number:  This displays the part number for the VCIM.

Module Information-Component Serial #8:  This is the first partition of the serial number.

Module Information-Component Serial #12:  This is the second partition of the serial number.

Module Information-Component Serial #13:  This is the third partition of the serial number.

VCI Module Station Identification Number (STID):  This is the station identification number stored in the VCIM which is used by the Onstar® Call Center.

Module ID:  This displays the version of Onstar® which the vehicle is equipped with.

Electronic Serial Number (ESN):  This is the electronic serial number stored in the VCIM which is used by the Onstar® Call Center.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.