Accelerator Pedal Position (APP) Sensor

2006 Chevrolet Suburban C2500, 6.0 USECTION Accelerator Pedal Position (APP) Sensor
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Accelerator Pedal Position (APP) Sensor Connector End View
GM886053Courtesy of GENERAL MOTORS CORP.
Accelerator Pedal Position (APP) Sensor

Pin Wire Color Circuit Function
A 0.35 PU 1272 Low Reference
B 0.35 L-BU 1162 APP Sensor 2 Signal
C 0.35 TN 1274 5-Volt Reference
D 0.35 WH/BK 1164 5-Volt Reference
E 0.35 D-BU 1161 APP Sensor 1 Signal
F 0.35 BN 1271 Low Reference
Connector Part Information 
  • OEM: 15326830
  • Service: 88953153
  • Description: 6-Way F GT 150 Series Sealed (BK)
Terminal Part Information 
  • Terminal/Tray: 12191819/8
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 15315247/J-35616-2A (GY)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.