Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Circuit/System Description
The liftglass ajar switch is normally open when the liftglass is fully closed. When the liftglass is opened, the ajar switch contacts close providing a path to ground. The instrument panel cluster (IPC) receives a serial data message from the liftgate module indicating the liftglass ajar status and the driver information center (DIC) located at the bottom of the IPC, illuminates the rear access open message.
The liftgate module detects the liftgate ratchet switch is closed to ground indicating the liftgate is open. The IPC receives a serial data message from the liftgate module indicating the liftgate ajar status and the driver information center (DIC) located at the bottom of the IPC, illuminates the rear access open message.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.