SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2008 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - ELECTRONIC STEERING CONTROL MODULE X2 THROUGH MEMORY SEAT MODULE)COMPONENT CONNECTOR END VIEWSINFLATABLE RESTRAINT SIDE IMPACT MODULE - LEFT FRONT (WITHOUT HP2 OR Z75 WITH HP2)
2006 Chevrolet Suburban C2500, 6.0 U

Inflatable Restraint Side Impact Module - Left Front (without HP2 or Z75 with HP2)

2006 Chevrolet Suburban C2500, 6.0 USECTION Inflatable Restraint Side Impact Module - Left Front (without HP2 or Z75 with HP2)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inflatable Restraint Side Impact Module - Left Front (without HP2 or Z75 with HP2)Connector End View
GM295469Courtesy of GENERAL MOTORS CORP.
Inflatable Restraint Side Impact Module- Left Front (without HP2 or Z75 with HP2)

Pin Wire Circuit Function
A 0.5 L-BU 3068 Inflatable Restraint Side Impact Module- Left Front High Control
B 0.5 L-GN/BK 3069 Inflatable Restraint Side Impact Module- Left Front Low Control
Connector Part Information
  • Harness: Body
  • OEM: 12110505
  • Service: 15306044
  • Description: 2-Way F Metri-Pack 150 Series (YE)
Terminal Part Information
  • Terminated Lead: Service by Connector Assembly- 15306044
  • Release Tool: Not Available
  • Diagnostic Test Probe: J-35616-14 (GN)
  • Terminal/Tray: Not Available
  • Core/Insulation Crimp: Not Available
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.