SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2008 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - ELECTRONIC STEERING CONTROL MODULE X2 THROUGH MEMORY SEAT MODULE)COMPONENT CONNECTOR END VIEWSFOLDING SEAT SWITCH- FRONT (ARS)
2006 Chevrolet Suburban C2500, 6.0 U

Folding Seat Switch- Front (ARS)

2006 Chevrolet Suburban C2500, 6.0 USECTION Folding Seat Switch- Front (ARS)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Folding Seat Switch - Front (ARS) Connector End View
GM1538776Courtesy of GENERAL MOTORS CORP.
Folding Seat Switch- Front (ARS)

Pin Wire Circuit Function
1 0.5 YE/BK 5813 Park Enable Control
2 0.5 PU 6811 Left Rear Seat Fold Tumble Signal
3 0.5 OG/BK 6810 Right Rear Seat Fold Tumble Signal
4 0.35 BK 1050 Ground
5 0.35 BN/WH 230 Instrument Panel Lamp Dimming Control
Connector Part Information
  • Harness Type: Overhead Console
  • OEM Connector: 15456019
  • Service Connector: 88988112
  • Description: 5-Way F HCM 5P Female Housing Assembly (BK)
Terminal Part Information
  • Terminal/Tray: SHCM-A03T-P025/20
  • Core/Insulation Crimp: J/J
  • Release Tool/Test Probe: 12094429/J-35616-64B (L-BU)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.