SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2002 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - A/C COMPRESSOR THROUGH ELECTRONIC POWER STEERING MODULE X1)COMPONENT CONNECTOR END VIEWSELECTRONIC ADJUSTABLE PEDAL (EAP) ASSEMBLY X2 (JF4)
2006 Chevrolet Suburban C2500, 6.0 U

Electronic Adjustable Pedal (EAP) Assembly X2 (JF4)

2006 Chevrolet Suburban C2500, 6.0 USECTION Electronic Adjustable Pedal (EAP) Assembly X2 (JF4)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Electronic Adjustable Pedal (EAP) Assembly X2 (JF4) Connector End View
GM2177019Courtesy of GENERAL MOTORS CORP.
Electronic Adjustable Pedal (EAP) Assembly X2 (JF4)

Pin Wire Circuit Function
1 WH - Reference Voltage
2 L-GN - Position Signal
3 BK - Signal Return
Connector Part Information
  • Harness Type: Adjustable Pedal Motor Assembly
  • OEM Connector: Service by Assembly - See Part Catalog
  • Service Connector: Service by Assembly - See Part Catalog
  • Description: 3-Way F (BK)
Terminal Part Information
  • Terminated Lead: Service by Component Assembly - See Part Catalog
  • Release Tool: Not Available
  • Diagnostic Test Probe: Pending
  • Terminal/Tray: Service by Harness - See Part Catalog
  • Core/Insulation Crimp: Not Available
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.