Auxiliary Body Control Module Replacement (Domestic)

2006 Chevrolet Suburban C2500, 6.0 USECTION Auxiliary Body Control Module Replacement (Domestic)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Auxiliary Body Control Module
GM1897790Courtesy of GENERAL MOTORS CORP.
Auxiliary Body Control Module Replacement (Domestic)

Callout Component Name
Preliminary ProceduresΒ 
Remove the inflatable restraint module. Refer to Instrument Panel Inflatable Restraint Module Replacement .
1 Auxiliary Body Control Module

Procedure

  1. Press on the tabs to release the auxiliary body control module.
  2. Disconnect the electrical connectors.
  3. Reprogram the auxiliary body control module if replaced. Refer to Control Module References .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.