Wireless Communication Interface Antenna Replacement

2006 Chevrolet Suburban C2500, 6.0 USECTION Wireless Communication Interface Antenna Replacement
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Wireless Communication Interface Antenna
GM2089149Courtesy of GENERAL MOTORS CORP.
Wireless Communication Interface Antenna Replacement

Callout Component Name
Preliminary Procedure 
Remove the communication interface module. Refer to Communication Interface Module Replacement (Cadillac) , Communication Interface Module Replacement (Except Cadillac) 
1 Wireless Communication Interface Antenna Bluetooth Module
Procedure 
Unsnap the Antenna from Communication Module.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.