SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1845 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - S)COMPONENT CONNECTOR END VIEWS - SSEAT CLIMATE CONTROL MODULE X3 (KB6)
2006 Chevrolet Suburban C2500, 6.0 U

Seat Climate Control Module X3 (KB6)

2006 Chevrolet Suburban C2500, 6.0 USECTION Seat Climate Control Module X3 (KB6)
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Seat Climate Control Module X3 (KB6)
GM850856Courtesy of GENERAL MOTORS CORP.
Seat Climate Control Module X3 (KB6)

Pin Wire Circuit Function
1-2 - - Not Used
3 0.35 D-BU 7012 Passenger Seat Cushion Blower Speed Control
4 0.35 WH/BU 7011 Passenger Seat Back Blower Speed Control
5 - - Not Used
6 0.35 WH 5908 Right Heated/Cooled Seat Mode Signal
7 0.35 L-GN 5916 Low Reference
8 0.35 WH 5914 5-Volt Reference
9 0.35 D-BU/WH 6443 Serial Data
10 - - Not Used
11 0.35 OG 7009 Driver Seat Cushion Blower Speed Control
12 0.35 TN 7010 Driver Seat Back Blower Speed Control
13 - - Not Used
14 0.35 D-GN 5906 Left Heated/Cooled Seat Mode Signal
15 0.35 GY 5912 Low Reference
16 0.35 D-GN 5918 5-Volt Reference
Connector Part Information 
  • Harness: Passenger Seat
  • OEM: 15394150
  • Service: 13504130
  • Description: 16-Way F (BK)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.