Front Side Marker Lamp Bulb Replacement (GMC)

2006 Chevrolet Suburban C2500, 6.0 USECTION Front Side Marker Lamp Bulb Replacement (GMC)
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Side Marker Lamp Bulb (GMC)
GM1833721Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure:Β 
Remove either the LF or RF headlamp assembly. Refer to Headlamp Replacement (Chevrolet)Β  or Headlamp Replacement (GMC )Β  or Headlamp Replacement (HD Diesel)Β .
1 Lamp Harness Socket
Tip:Β  Rotate the marker lamp socket a quarter turn counterclockwise and remove the lamp socket from the headlamp assembly.
2 Front Side Marker Lamp Bulb
Tip:Β  Pull the front side marker lamp bulb straight from the lamp socket.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.