Fastener Tightening Specifications

2006 Chevrolet Suburban C2500, 6.0 USECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Brake Caliper Bleeder Valve 10 N.m 89 lb in
Brake Caliper Bracket Bolt - Front 185 N.m 136 lb ft
Brake Caliper Bracket Bolt - Rear 120 N.m 89 lb ft
Brake Caliper Guide Pin Bolt - Front 27 N.m 20 lb ft
Brake Caliper Guide Pin Bolt - Rear 27 N.m 20 lb ft
Brake Hose Fitting Bolt - Front 52 N.m 38 lb ft
Brake Hose Fitting Bolt - Rear 52 N.m 38 lb ft
Brake Rotor Screw 10 N.m 89 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.