SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1443 (WIPER SYSTEM & WASHER SYSTEM)REPAIR INSTRUCTIONSWINDSHIELD WASHER SOLVENT LEVEL SWITCH REPLACEMENT (GMC)
2006 Chevrolet Suburban C2500, 6.0 U

Windshield Washer Solvent Level Switch Replacement (GMC)

2006 Chevrolet Suburban C2500, 6.0 USECTION Windshield Washer Solvent Level Switch Replacement (GMC)
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Windshield Washer Solvent Level Switch (GMC)
GM1839448Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove the windshield washer container. Refer to Windshield Washer Solvent Container Replacement .
  2. Using two flat-bladed tools placed under the edges of the level indicator pry outward to release the level sensor from the washer container.
  3. Discard the level indicator grommet.
1 Windshield Washer Solvent Level Indicator
Tip:  Ensure the square edge of the level indicator faces upward upon installation.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.