Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1331 (GENERAL INFORMATION)INTRODUCTIONLIFTING & JACKING THE VEHICLEVEHICLE JACKING
2006 Chevrolet Suburban C2500, 6.0 U
Vehicle Jacking
2006 Chevrolet Suburban C2500, 6.0 USECTION Vehicle Jacking
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Park the vehicle on a clean, hard, level surface before jacking the vehicle.
- Any time you lift the vehicle on one end, chock the wheels at the opposite end.
- Use jack stands in order to provide support.
- When supporting the vehicle using jack stands, place the jack stands under the side rails or the axle.
- When lifting under the rear differential, do not allow the jack pad to contact the rear stabilizer bar or mounting hardware.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.