SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1257 (COMPONENT LOCATIONS & COMPONENT CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSWINDOW SWITCH - RIGHT REAR
2006 Chevrolet Suburban C2500, 6.0 U

Window Switch - Right Rear

2006 Chevrolet Suburban C2500, 6.0 USECTION Window Switch - Right Rear
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Window Switch RR Connector End View
GM556473Courtesy of GENERAL MOTORS CORP.
Window Switch - Right Rear

Pin Wire Circuit Function
A 0.35 GY 8 Instrument Panel Lamp Supply Voltage/Instrument Panel Lamps Dimmer Switch Signal
B 0.35 PU 171 Power Window Master Switch Right Rear Down Signal
C 0.35 L-GN 170 Power Window Master Switch Right Rear Up Signal
D 0.35 L-BU/WH 280 Power Window Master Switch Lockout Right Rear Signal
E 2 BK 450 Ground
F 1 D-BU 670 Power Window Motor Right Rear Up Control
G 1 BN 671 Power Window Motor Right Rear Down Control
H 1 RD/WH 4640 Battery Positive Voltage
Connector Part Information 
  • OEM: 15326924
  • Service: See Catalog
  • Description: 8-Way F GT 280 Series (BK)
Terminal Part Information 
  • Pins: E
  • Terminal/Tray: 15304713/19
  • Core/Insulation Crimp: 4/4
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
  • Pins: A-D, F-H
  • Terminal/Tray: 15304711/8
  • Core/Insulation Crimp: Pins A-D - E/A
  • Core/Insulation Crimp: Pins F-H - 2/A
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.