SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1257 (COMPONENT LOCATIONS & COMPONENT CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSMEMORY SEAT MODULE (MSM) (A45) X6
2006 Chevrolet Suburban C2500, 6.0 U

Memory Seat Module (MSM) (A45) X6

2006 Chevrolet Suburban C2500, 6.0 USECTION Memory Seat Module (MSM) (A45) X6
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Memory Seat Module (MSM) (A45) X6 Connector End View
GM1715228Courtesy of GENERAL MOTORS CORP.
Memory Seat Module (MSM) (A45) X6

Pin Wire Circuit Function
1 - - Not Used
2 0.35 D-BU 5915 Passenger Seat Blower Speed Control
3-5 - - Not Used
6 0.35 YE 1065 Driver Seat Lumbar Forward Switch Signal
7 - - Not Used
8 0.35 GY 2096 Steering Column Tilt and Telescope Up Switch Signal
9 0.35 PK 2094 Steering Column Tilt and Telescope Forward Switch Signal
10 - - Not Used
11 0.35 OG 5919 Driver Seat Blower Speed Control
12-15 - - Not Used
16 0.35 D-BU 1064 Driver Seat Lumbar Rearward Switch Signal
17 - - Not Used
18 0.35 YE 2097 Steering Column Tilt and Telescope Down Switch Signal
19 0.35 OG 2095 Steering Column Tilt and Telescope Reverse Switch Signal
20 - - Not Used
Connector Part Information 
  • OEM: 15126710
  • Service: See Catalog
  • Description: 20-Way F (GY)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.