Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Remote Auxiliary Jack/USB Adapter
A remote 3.5 mm auxiliary stereo jack and USB connector allows playback of audio signals from remote devices (e.g., laptop computer, IPOD, MP3 player, etc.). The Aux jack is a five wire connector interface. The USB is a four wire plus shield USB cable interface. The USB connector uses the USB standards, 1.1 and 2.0. This type of connector supports rates for low speed (1.5 Mb/s), full speed (12 Mb/s), and high speed (480 Mb/s). The remote Aux jack/USB adapter is located in the rear console bin.
The radio detects the presence or absence of an audio mini-plug through the AuxJackDetect input. When the audio mini-plug is inserted in the Aux Detect Switch the mechanical switch closes. When removed the switch is open.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.