Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1227 (SUPPLEMENTAL INFLATABLE RESTRAINT SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Chevrolet Suburban C2500, 6.0 U
Fastener Tightening Specifications
2006 Chevrolet Suburban C2500, 6.0 USECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Inflatable Restraint Front End Sensor Mounting Bolt | 11 N.m | 97 lb in |
| Inflatable Restraint Front Seat Side Module Nut | 9 N.m | 80 lb in |
| Inflatable Restraint Sensing and Diagnostic Module Bolt | 7 N.m | 56 lb in |
| Inflatable Restraint Sensing and Diagnostic Module Nut | 7 N.m | 56 lb in |
| Inflatable Restraint Side Impact Sensor Assembly Bolt | 9 N.m | 80 lb in |
| Inflatable Restraint Side Impact Sensor Module Bolt | 9 N.m | 80 lb in |
| Inflatable Restraint Steering Wheel Module Coil Bolt | 3 N.m | 27 lb in |
| Instrument Panel Inflatable Restraint Module Nuts | 10 N.m | 89 lb in |
| Roof Side Rail Inflatable Restraint Module Electrical Harness Bolt | 9 N.m | 80 lb in |
| Roof Side Rail Inflatable Restraint Module Integral Bolts | 9 N.m | 80 lb in |
| Seat Shoulder Belt Guide Bolt | 47 N.m | 35 lb ft |
| Seat Shoulder Belt Retractor Screw | 47 N.m | 35 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.