Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1226 (INSTRUMENT PANEL TRIM AND CONSOLE TRIM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Chevrolet Suburban C2500, 6.0 U
Fastener Tightening Specifications
2006 Chevrolet Suburban C2500, 6.0 USECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Front Floor Console Armrest Screw | 2.5 N.m | 22 lb in |
| Front Floor Console Compartment Door Hinge Screw | 2.5 N.m | 22 lb in |
| Front Floor Console Compartment Door Latch Screw | 2.5 N.m | 22 lb in |
| Front Floor Console Compartment Door Lower Latch Screw | 2.5 N.m | 22 lb in |
| Front Floor Console Compartment Screw | 2.5 N.m | 22 lb in |
| Front Floor Console Cupholder Screw | 2.5 N.m | 22 lb in |
| Front Floor Console Lower Armrest Retainer Screw | 2.5 N.m | 22 lb in |
| Front Floor Console Lower Armrest Retainer Screw | 2.5 N.m | 22 lb in |
| Front Floor Console Rear Compartment Screw | 2.5 N.m | 22 lb in |
| Front Floor Console Screw | 2.5 N.m | 22 lb in |
| Front Floor Console Trim Plate Screw | 2.5 N.m | 22 lb in |
| Front Floor Console Upper Closeout Screw | 2.5 N.m | 22 lb in |
| Front Floor Console Upper Closeout Screw | 2.5 N.m | 22 lb in |
| Front Floor Console Upper Closeout Screw | 2.5 N.m | 22 lb in |
| Instrument Panel Carrier to Body Bolts | 25 N.m | 18 lb ft |
| Instrument Panel Carrier to Body Nuts | 25 N.m | 18 lb ft |
| Instrument Panel Carrier to HVAC Module Screw | 2.5 N.m | 22 lb in |
| Instrument Panel Center Compartment Screws | 1 N.m | 9 lb in |
| Instrument Panel Cluster Trim Plate Cover Screw | 2 N.m | 18 lb in |
| Instrument Panel Compartment Bolts | 2.5 N.m | 22 lb in |
| Instrument Panel Compartment Door Latch Screw | 2.5 N.m | 22 lb in |
| Instrument Panel Compartment Screws | 2.5 N.m | 22 lb in |
| Instrument Panel Drivers Knee Bolster Bracket Bolt | 9 N.m | 80 lb in |
| Instrument Panel Inflatable Restraint Bolt | 10 N.m | 89 lb in |
| Instrument Panel Insulator Screw | 2 N.m | 18 lb in |
| Instrument Panel Lower Trim Panel Bolt | 2.5 N.m | 22 lb in |
| Instrument Panel Upper Trim Panel Screw | 2.5 N.m | 22 lb in |
| Parking Brake Lever Bracket Reinforcement Screws | 2.5 N.m | 22 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.