Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1223 (FRAME AND UNDERBODY)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Chevrolet Suburban C2500, 6.0 U
Fastener Tightening Specifications
2006 Chevrolet Suburban C2500, 6.0 USECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Brake Pipe Bracket Retaining Nuts | 10 N.m | 89 lb in |
| Engine Mount Lower Retaining Nuts | 50 N.m | 37 lb ft |
| Front Compartment Lower Noise Shield Bolts | 5 N.m | 44 lb in |
| Front Fog Lamp Bezel Screw | 1.3 N.m | 12 lb in |
| Front Frame Mountings Bolts | 191 N.m | 141 lb ft |
| Front Stabilizer Shaft Bolts | 60 N.m | 44 lb ft |
| Lower Rear Shock Bolts | 150 N.m | 111 lb ft |
| Rear Brake Lines At The Forward Rear Wheelhouse Nuts | 15 N.m | 11 lb ft |
| Rear Frame Bolts (Front) | 265 N.m | 195 lb ft |
| Rear Frame Bolts (Rear) | 191 N.m | 141 lb ft |
| Transmission Support Bolts | 60 N.m | 44 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.