Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1220 (LIGHTING SYSTEMS)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Chevrolet Suburban C2500, 6.0 U
Fastener Tightening Specifications
2006 Chevrolet Suburban C2500, 6.0 USECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Brake Pedal Position Sensor Bolt | 9 N.m | 80 lb in |
| Front Fog Lamp to Front Fascia Bracket | 2 N.m | 18 lb in |
| Headlamp Capsule Bolt | 6 N.m | 53 lb in |
| Headlamp Capsule Nut | 6 N.m | 53 lb in |
| Headlamp Leveling Sensor Clinch Nut - Front | 9 N.m | 80 lb in |
| Headlamp Leveling Sensor Clinch Nut - Rear | 9 N.m | 80 lb in |
| High Mounted Stop Lamp to the Rear Compartment Lid Nut | 6 N.m | 53 lb in |
| Overhead Console Reading Lamp Screw | 2 N.m | 18 lb in |
| Rear Fog Lamp Bracket to Lamp Assembly Screw - European | 1.5 N.m | 13 lb in |
| Tail Lamp to the Body Panel Nut | 6 N.m | 53 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.