SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1041 (ENGINE CONTROLS AND FUEL - 6.6L (LMM) - INTRODUCTION (2 OF 2))COMPONENT LOCATORENGINE CONTROLS CONNECTORSGLOW PLUG CONTROL MODULE (GPCM) X2
2006 Chevrolet Suburban C2500, 6.0 U

Glow Plug Control Module (GPCM) X2

2006 Chevrolet Suburban C2500, 6.0 USECTION Glow Plug Control Module (GPCM) X2
WARNING: This page is about a different car, the 2007 GMC Sierra, 2007 GMC Cab & Chassis Sierra, 2007 Chevrolet Silverado, and 2007 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Glow Plug Control Module (GPCM) X2 Connector End View
GM1576764Courtesy of GENERAL MOTORS CORP.
Glow Plug Control Module (GPCM) X2 Connector Parts Information

Connector Part Information 
  • OEM: 897386 6110
  • Service: See Catalog
  • Description: 53-Way F Sealed (BK)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
Glow Plug Control Module (GPCM) X2 Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 2 RD/WH HB13 Glow Plug 3 Supply Voltage
2 2 WH/GN HB12 Glow Plug 2 Supply Voltage
3 2 RD/GN HB11 Glow Plug 1 Supply Voltage
4 2 WH/YE HB14 Glow Plug 4 Supply Voltage
5 - - Not Used
6 2 WH/RD HB18 Glow Plug 8 Supply Voltage
7 2 RD/L-GN HB15 Glow Plug 5 Supply Voltage
8 2 WH/L-GN HB16 Glow Plug 6 Supply Voltage
9 2 PK HB17 Glow Plug 7 Supply Voltage
10-25 - - Not Used
26 0.75 YE IC182 IAH Command 2
27 0.75 RD IC185 IAH Feedback Signal
28 0.75 BK IC180 IAH Temperature Signal
29 0.75 PK IC183 IAH Current Signal
30 0.75 TN IC184 IAH Voltage Signal
31 1 OG IC181 IAH Command 1
32-42 - - Not Used
43 0.75 TN HB01 High Speed GMLAN Serial Data Bus (-)
44 0.75 TN/BK HB20 High Speed GMLAN Serial Data Bus (+)
45 0.75 TN HB05 High Speed GMLAN Serial Data Bus (-)
46 0.75 TN/BK HB06 High Speed GMLAN Serial Data Bus (+)
47-50 - - Not Used
51 0.75 RD HB03 Ground
52 0.75 PK HB02 Ignition 1 Voltage
53 1 D-BU HB04 Accessory Wakeup Serial Data
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.