SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C2500, 6.0 UREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1026 (ANTI-LOCK BRAKE SYSTEM, TRACTION CONTROL SYSTEM & STABILITY CONTROL SYSTEM)COMPONENT LOCATORANTILOCK BRAKE SYSTEM CONNECTORSYAW RATE AND LATERAL ACCELERATION SENSOR (JL4)
2006 Chevrolet Suburban C2500, 6.0 U

Yaw Rate and Lateral Acceleration Sensor (JL4)

2006 Chevrolet Suburban C2500, 6.0 USECTION Yaw Rate and Lateral Acceleration Sensor (JL4)
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Yaw Rate and Lateral Acceleration Sensor (JL4) Connector End View
GM1420835Courtesy of GENERAL MOTORS CORP.
Yaw Rate and Lateral Acceleration Sensor (JL4) Connector Parts Information

Connector Part Information 
  • OEM: 13583918
  • Service: See Catalog
  • Description: 4-Way F 0.64 MQS Series Sealed (BK)
Terminal Part Information 
  • Terminal/Tray: 962885-5/15
  • Core/Insulation Crimp: 6/6
  • Release Tool/Test Probe: 12094429/J-35616-64B (L-BU)
Yaw Rate and Lateral Acceleration Sensor (JL4) Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 0.5 BK/WH 2751 Low Reference
2 0.5 L-GN/BK 6432 CAN Bus Low Serial Data
3 0.5 TN/WH 6433 CAN Bus High Serial Data
4 0.5 D-GN 2087 5-Volt Reference
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.