Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C2500, 6.0 UREPAIR AND DIAGNOSISBODY & FRAMESEATSSEAT SYSTEMREPAIR INSTRUCTIONSMODULE REPLACEMENT - SEAT CLIMATE CONTROL - FRONT SEATINSTALLATION PROCEDURE

2006 Chevrolet Suburban C2500, 6.0 U

Installation Procedure

2006 Chevrolet Suburban C2500, 6.0 USECTION Installation Procedure

Fig 1: View Of Seat Climate Control Module & Screws

Courtesy of GENERAL MOTORS CORP.

Position the module (2) to the bracket (3).

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the screws (1).
Tighten: Tighten the screws to 5 N.m (44 lb in).

Fig 2: View Of Seat Climate Control Module Bracket & Screw

Courtesy of GENERAL MOTORS CORP.

Position the module and bracket assembly to the seat cushion frame.
Install the screws (1).
Tighten: Tighten the screws to 5 N.m (44 lb in).
Connect the climate control module electrical connector.
Install the front seat cushion. Refer to Seat Cushion Frame Replacement - Front .

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.