Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C2500, 6.0 UREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTINFOTAINMENTCELLULAR COMMUNICATION SYSTEMSDIAGNOSTIC INFORMATION AND PROCEDURESSCAN TOOL DATA LIST
2006 Chevrolet Suburban C2500, 6.0 U
Scan Tool Data List
2006 Chevrolet Suburban C2500, 6.0 USECTION Scan Tool Data List
Scan Tool Data List
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition ON with Engine OFF | |||
| 8-Digit GM Part Number | Module 2 | 8 Digits | 93807890 |
| Component Serial Number 13-16 | Module 1 | 4 Digits | 0007 |
| Date | GPS Data | Date | DD/MM/YY |
| Electronic Serial Number | Module 2 | 11 Digits | 16832516749 |
| GPS Signal | GPS Data | Yes/No | Yes |
| Julian Date of Build | Module 1 | 3 Digits | 067 |
| Module ID | Module 2 | Alpha-numeric | Generation 6 |
| Signal Strength | Signal Strength | 0-100 | 68 |
| Signal Type | Signal Strength | Analog/Digital | Digital |
| Software ID | Module 1 | 3 Digits | 146 |
| Time | GPS Data | Time | HH:MM:SS |
| Transceiver ID | Signal Strength | 2-5 Digits | Varies |
| VCI Module Station ID | Module 2 | 10 Digits | 0002086783 |
| Year Module Built | Module 1 | 4 Digits | 2001 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.