SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C2500, 6.0 UREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMESEATSSEAT SYSTEMREPAIR INSTRUCTIONSSEAT BACK FRAME REPLACEMENT - REAR (60/40 SPLIT - 50/50 SPLIT)INSTALLATION PROCEDURE
2006 Chevrolet Suburban C2500, 6.0 U

Installation Procedure

2006 Chevrolet Suburban C2500, 6.0 USECTION Installation Procedure
    Fig 1: Removing Rear Seat Back Frame
    GM276335Courtesy of GENERAL MOTORS CORP.
  1. Install the seat-back frame (4) to the seat cushion frame.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts which retain the seat-back frame to the seat cushion frame.

    Tighten:  Tighten to 35 N.m (26 lb ft).

  3. Install the seat-back cover. Refer to Seat Back Cover and Pad Replacement - Rear (50/50 Split - 60/40 Split)  or Seat Back Cover and Pad Replacement - Rear (Bench) .
  4. Install the armrest to the seat back. Refer to Armrest Replacement - Rear Seat (Bucket)  or Armrest Replacement - Rear Seat (60/40 Split) .
  5. Install the seat to the vehicle. Refer to Seat Replacement - Rear No. 1 (60/40 Split)  or Seat Replacement - Rear No. 1 (Bucket) , Seat Replacement - Rear No. 2  or Seat Replacement - Rear No. 2 - 50-50 .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.