SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C1500, 5.3 ZREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 992 (LIGHTING SYSTEMS)REPAIR INSTRUCTIONSLICENSE LAMP BULB REPLACEMENT
2006 Chevrolet Suburban C1500, 5.3 Z

License Lamp Bulb Replacement

2006 Chevrolet Suburban C1500, 5.3 ZSECTION License Lamp Bulb Replacement
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of License Lamp Bulb
GM1923749Courtesy of GENERAL MOTORS CORP.
License Lamp Bulb Replacement

Callout Component Name

Procedure

  1. Reach under the rear bumper for the bulb socket.
  2. Turn the bulb socket counter-clockwise and pull the bulb socket out of the connector.
  3. Pull the old bulb from the socket, keeping the bulb straight as you pull it out.
  4. Install the new bulb.
1 Bulb Socket
2 Rear License Plate Lamp Bulb
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.