SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C1500, 5.3 ZREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 540 (WIRING SYSTEMS - SPECIFICATIONS, COMPONENT VIEWS AND CONNECTOR END VIEWS)COMPONENT LOCATORINLINE HARNESS CONNECTOR END VIEWSC303
2006 Chevrolet Suburban C1500, 5.3 Z

Inline Harness Connector End Views: C303

2006 Chevrolet Suburban C1500, 5.3 ZSECTION C303
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
C303 Instrument Panel Harness Terminal Identification To Drivers Seat Harness

GM62461Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12064766
  • 8-Way F Metri-Pack 150 Series (BLU)
 Connector Part Information
  • 12064767
  • 8-Way M Metri-Pack 150 Series (BLU)
Pin Wire Color Circuit No. Function Pin Wire Color Circuit No. Function
A RED 2098 Steering Column Telescope Motor Forward A RED 2098 Steering Column Telescope Motor Forward
B BLK 2110 Steering Column Telescope Motor Reverse B BLK 2110 Steering Column Telescope Motor Reverse
C PPL 1985 Steering Column Telescope Motor 5 Volt Reference C PPL 1985 Steering Column Telescope Motor 5 Volt Reference
D BLK 782 Memory Seat/Mirror Sensor Low Reference D BLK 782 Memory Seat/Mirror Sensor Low Reference
E ORN 2153 Steering Column Telescope Motor Signal E ORN 2153 Steering Column Telescope Motor Signal
F PNK 2094 Steering Column Tilt and Telescope Forward Switch Signal F PNK 2094 Steering Column Tilt and Telescope Forward Switch Signal
G ORN 2095 Steering Column Tilt and Telescope Reverse Switch Signal G ORN 2095 Steering Column Tilt and Telescope Reverse Switch Signal
H - - Not Used H - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.