SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C1500, 5.3 ZREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 533 (DATA LINK COMMUNICATION SYSTEM)COMPONENT LOCATORDATA LINK COMMUNICATIONS CONNECTOR END VIEWS
2006 Chevrolet Suburban C1500, 5.3 Z

Data Link Communications Connector End Views

2006 Chevrolet Suburban C1500, 5.3 ZSECTION Data Link Communications Connector End Views
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Data Link Connector Terminal Identification (DLC)

GM68793Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12110250
  • 16-Way F Metri-Pack 150 Series (BLK)
Pin Wire Color Circuit No. Function
1 - - Not Used
2 PPL 1132 Serial Data
3 - - Not Used
4 BLK 150 Ground
5 BLK/WHT 851 Ground
6-13 - - Not Used
14 DK GRN 835 Diagnostic Signal -Entertainment and Comfort
15 - - Not Used
16 ORN 1240 Battery Positive Feed
Star Connector Terminal Identification 1

GM338576Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 15317802
  • 12-Way F Metri-Pack 150 Series (GRY)
Pin Wire Color Circuit No. Function
A PPL 1132 DLC Class 2 Serial Data
B DK GRN 1049 PCM Class 2 Serial Data
C - - Not Used
D ORN 1044 Radio Class 2 Serial Data
E LT BLU 1122 ABS/TCS Class 2 Serial Data
F DK BLU 1128 SDM Class 2 Serial Data
G GRY 1036 IPC Class 2 Serial Data
H DK BLU/WHT 1126 SCM (Suspension) Class 2 Serial Data
J PNK 1045 RFA Class 2 Serial Data
K - - Not Used
L WHT 1038 HVAC Class 2 Serial Data
M LT GRN 1037 BCM Class 2 Serial Data
Star Connector Terminal Identification 2

GM338576Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 15317802
  • 12-Way F Metri-Pack 150 Series (GRY)
Pin Wire Color Circuit No. Function
A PPL 1132 DLC Class 2 Serial Data
B - - Not Used
C BRN 1046 DDM Class 2 Serial Data
D TAN 1047 PDM Class 2 Serial Data
E - J - - Not Used
K BRN/WHT 1048 SCM (Seat) Class 2 Serial Data
L - M - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.