Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C1500, 5.3 ZREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 234 (SEAT SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Chevrolet Suburban C1500, 5.3 Z
Fastener Tightening Specifications
2006 Chevrolet Suburban C1500, 5.3 ZSECTION Fastener Tightening Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Savana Special, 2003 GMC Savana Camper Special, 2003 GMC Savana, 2003 Chevrolet RV Cutaway, and 2003 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Identifying Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Assist Handle to Seat back Screws | 5 N.m | 44 lb in |
| Front Seat Assembly to the Vehicle | 60 N.m | 44 lb ft |
| Hinge/Recliner Mechanism to the Seat Back Frame and Seat Cushion Frame Bolts | 32 N.m | 24 lb ft |
| Power Seat Adjuster Switch to Seat Cushion Screws | 2 N.m | 18 lb in |
| Rear Seat Rail to the Floor Nuts | 43 N.m | 32 lb ft |
| Rear Seat Risers to the Seat Frame Bolts | 55 N.m | 41 lb ft |
| Recliner Handle to Recliner Mechanism Screws | 2.5 N.m | 23 lb in |
| Recliner cable screws | 2 N.m | 18 lb in |
| Seat Adjuster to the Seat Cushion Frame Bolts | 25 N.m | 18 lb ft |
| Seat Adjuster to the Seat Riser | 45 N.m | 33 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.