SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C1500, 5.3 ZREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2172 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEW 3 OF 5)HEATED SEAT CONTROL MODULE X1 (HP2)
2006 Chevrolet Suburban C1500, 5.3 Z

Heated Seat Control Module X1 (HP2)

2006 Chevrolet Suburban C1500, 5.3 ZSECTION Heated Seat Control Module X1 (HP2)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Heated Seat Control Module X1 (HP2) Connector End View
GM1664577Courtesy of GENERAL MOTORS CORP.
Heated Seat Control Module X1 (HP2)

Pin Wire Color Circuit Function
1 1 PU 2424 Driver Heated Seat Back Element Control
2 1 PK 2480 Front Passenger Heated Seat Cushion Element Control
3 1 D-BU 2479 Heated Seat Element Control
4 1 L-BU 2433 Front Passenger Heated Seat Back Element Control
5 1 L-GN 2078 Driver Heated Seat Cushion Element Control
6 1 PK 2077 Heated Seat Cushion Element Control
Connector Part Information 
  • OEM: 6098-4606
  • Service: See Catalog
  • Description: 6-Way F (BN)
Terminal Part Information 
  • Terminal/Tray: 8100-4444/22
  • Core/Insulation Crimp: 2/A
  • Release Tool/Test Probe: 15315247/J-35616-35 (VT)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.