SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C1500, 5.3 ZREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2167 (OEM CONNECTOR END VIEWS - SIERRA & SILVERADO - LIGHTING SYSTEMS, MIRROR, OBJECT DETECTION, POWER AND GROUNDING, POWER OUTLET, POWER SEAT, POWER TAKE-OFF (PTO), REMOTE FUNCTION, SEAT BELT, SECONDARY/CONFIGURABLE CONTROL, SHIFT LOCK CONTROL, SIR)SIR CONNECTOR END VIEWSINFLATABLE RESTRAINT I/P MODULE CONNECTOR END VIEW (-10 SERIES)
2006 Chevrolet Suburban C1500, 5.3 Z

Inflatable Restraint I/P Module Connector End View (-10 Series)

2006 Chevrolet Suburban C1500, 5.3 ZSECTION Inflatable Restraint I/P Module Connector End View (-10 Series)
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inflatable Restraint I/P Module (-10 Series) Connector End View
GM647932Courtesy of GENERAL MOTORS CORP.
Inflatable Restraint I/P Module (-10 Series) Connector Parts Information

Connector Part Information 
  • OEM: 15358601
  • Service: 15306300
  • Description: 2-Way M Metri-Pack 280 Series (YE)
Terminal Part Information 
  • Terminal/Tray: Service with Pigtail
  • Core/Insulation Crimp: N/A
  • Release Tool/Test Probe: 12094429/J-35616-5 (PU)
Inflatable Restraint I/P Module (-10 Series) Connector Terminal Identification

Pin Wire Color Circuit No. Function
A 0.5 YE 3025 I/P Module - Stage 1 - High Control
B 0.5 OG 3024 I/P Module - Stage 1 - Low Control
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.