Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C1500, 5.3 ZREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2157 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS PART 3)OUTSIDE REARVIEW MIRROR SWITCH (DL8/DPN)
2006 Chevrolet Suburban C1500, 5.3 Z
Outside Rearview Mirror Switch (DL8/DPN)
2006 Chevrolet Suburban C1500, 5.3 ZSECTION Outside Rearview Mirror Switch (DL8/DPN)
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Outside Rearview Mirror Switch (DL8/DPN)
| Pin | Wire | Circuit | Function |
|---|---|---|---|
| A | - | - | Not Used |
| B | 0.5 RD/WH | 3540 | Battery Positive Voltage (DL8/DPN) |
| C | 0.5 TN | 329 | Driver Mirror Motor Supply Voltage (DL8/DPN) |
| D | 0.5 OG/WH | 881 | Passenger Mirror Motor Right Control (DL8/DPN) |
| E | 0.35 BN/WH | 230 | Instrument Panel Lamps Dimming Control (DL8/DPN) |
| F | 0.5 PU/WH | 889 | Passenger Mirror Motor Down Control (DL8/DPN) |
| G | 0.5 BK | 1850 | Ground (DL8/DPN) |
| H | 0.5 TN/WH | 330 | Passenger Mirror Motor Supply Voltage (DL8/DPN) |
| J | 0.5 WH | 81 | Driver Mirror Motor Right Control (DL8/DPN) |
| K | 0.5 L-GN | 89 | Driver Mirror Motor Down Control (DL8/DPN) |
Connector Part Information
|
Terminal Part Information
|
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.