Ignition Switch

2006 Chevrolet Suburban C1500, 5.3 ZSECTION Ignition Switch
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Ignition Switch Connector End View
GM1664590Courtesy of GENERAL MOTORS CORP.
Ignition Switch

Pin Wire Circuit Function
1 - - Not Used
2 0.35 PK 3 Ignition 1 Voltage
3 0.35 BN 4 Accessory Voltage
4 0.35 RD/WH 540 Battery Positive
5 0.35 PK 1020 Ignition 3 Voltage
6 0.35 WH 530 Ignition 0 Voltage
Connector Part Information 
  • OEM: HCMPB-C06-K
  • Service: See Catalog
  • Description: 6-Way F HCM Series (BK)
Terminal Part Information 
  • Terminal/Tray: SHCM-A0ST-P025/20
  • Core/Insulation Crimp: J/J
  • Release Tool/Test Probe: 12094429/J-35616-64B (L-BU)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.