Drive Motor Generator Battery Control Module X5 (HP2)

2006 Chevrolet Suburban C1500, 5.3 ZSECTION Drive Motor Generator Battery Control Module X5 (HP2)
WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Drive Motor Generator Battery Control Module X5 (HP2) Connector End View
GM334475Courtesy of GENERAL MOTORS CORP.
Drive Motor Generator Battery Control Module X5 (HP2)

Pin Wire Circuit Function
1 RD - High Voltage Monitor Positive
2 - - Not Used
3 - - Not Used
4 - - Not Used
5 BK - High Voltage Monitor Negative
Connector Part Information 
  • OEM: 4F5500-000x
  • Service: See Catalog
  • Description: 5-Way F (OG)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.