Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C1500, 5.3 ZREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2146 (WHEEL ALIGNMENT SYSTEM)SPECIFICATIONSWHEEL ALIGNMENT SPECIFICATIONS
2006 Chevrolet Suburban C1500, 5.3 Z
Wheel Alignment Specifications
2006 Chevrolet Suburban C1500, 5.3 ZSECTION Wheel Alignment Specifications
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Wheel Alignment Specifications
| Model | Caster | Cross Caster (L-R) | Camber | Cross Camber (L+R) | Sum Toe Left + Right |
Steering Wheel Angle | |
|---|---|---|---|---|---|---|---|
| Left | Right | ||||||
|
NOTE:
Caster is now relative to ground |
|||||||
| C/K 1500 Tahoe/Yukon/Suburban/Yukon XL/Avalanche w/17" Tires w/QJP, QJM, QAN and R5C (Equipped with Bridgestone Tires) |
2.95 ±1.00 Degrees | 3.05 ±1.00 Degrees | -0.10 ±1.00 Degrees | -0.10 ±0.75 Degrees | 0.00 ±0.75 Degrees | +0.10 ±0.20 Degrees | -1.0 ±3.5 Degrees |
| C/K 1500 Tahoe/Yukon/Suburban/Yukon XL/Avalanche w/17" Tires w/QAS, QAN and R4Y (Equipped with Goodyear Tires) |
2.80 ±1.00 Degrees | 3.20 ±1.00 Degrees | -0.40 ±1.00 Degrees | -0.10 ±0.75 Degrees | 0.00 ±0.75 Degrees | +0.10 ±0.20 Degrees | -1.0 ±3.5 Degrees |
| CK 1500 Tahoe/Suburban/Avalanche/Yukon Denali/Yukon/Escalade ESV/Escalade EXT w/18" Tires w/QXK and Y91 |
3.05 ±1.00 Degrees | 2.95 ±1.00 Degrees | +0.10 ±1.00 Degrees | -0.10 ±0.75 Degrees | 0.00 ±0.75 Degrees | +0.10 ±0.20 Degrees | -1.0 ±3.5 Degrees |
| CK 1500 Tahoe w/17" Tires w/PPV (QAR) |
2.90 ±1.00 Degrees | 3.10 ±1.00 Degrees | -0.20 ±1.00 Degrees | -0.10 ±0.75 Degrees | 0.00 ±0.75 Degrees | +0.10 ±0.20 Degrees | -1.0 ±3.5 Degrees |
| C/K 1500 Tahoe/Yukon/Suburban/Yukon XL/Yukon Denali/Yukon Denali XL/Avalanche/Escalade EXT w/20" Tires w/QSS and QHX |
3.10 ±1.00 Degrees | 3.10 ±1.00 Degrees | 0.00 ±1.00 Degrees | -0.10 ±0.75 Degrees | 0.00 ±0.75 Degrees | +0.10 ±0.20 Degrees | -1.0 ±3.5 Degrees |
| C/K 1500 Tahoe/Yukon/Suburban/Yukon XL/Yukon Denali/Yukon Denali XL/Escalade/Escalade ESV/Escalade EXT w/18" Tires All |
3.05 ±1.00 Degrees | 2.95 ±1.00 Degrees | +0.10 ±1.00 Degrees | -0.10 ±0.75 Degrees | 0.00 ±0.75 Degrees | +0.20 ±0.20 Degrees | -1.0 ±3.5 Degrees |
| C/K 1500 Two Mode Hybrid w/18" Tires All |
3.05 ±1.00 Degrees | 2.95 ±1.00 Degrees | +0.10 ±1.00 Degrees | -0.10 ±0.75 Degrees | 0.00 ±0.75 Degrees | +0.20 ±0.20 Degrees | -1.0 ±3.5 Degrees |
| C/K 1500 Tahoe/Yukon/Suburban/Yukon XL/Yukon Denali/Yukon Denali XL/Escalade/Escalade ESV/Escalade EXT w/22" Tires All |
2.90 ±1.00 Degrees | 3.10 ±1.00 Degrees | -0.20 ±1.00 Degrees | -0.10 ±0.75 Degrees | 0.00 ±0.75 Degrees | +0.20 ±0.20 Degrees | -1.0 ±3.5 Degrees |
| C/K 1500 Two Mode Hybrid w/22" Tires All |
2.90 ±1.00 Degrees | 3.10 ±1.00 Degrees | -0.20 ±1.00 Degrees | -0.10 ±0.75 Degrees | 0.00 ±0.75 Degrees | +0.20 ±0.20 Degrees | -1.0 ±3.5 Degrees |
| C/K 2500 Suburban, Yukon XL All |
3.10 ±1.00 Degrees | 3.35 ±1.00 Degrees | -0.25 ±1.00 Degrees | +0.25 ±0.75 Degrees | 0.00 ±0.75 Degrees | +0.10 ±0.20 Degrees | -1.0 ±3.5 Degrees |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.