SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2006SUBURBAN C1500, 5.3 ZREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2009 (WIRING SYSTEMS AND POWER MANAGEMENT - INLINE HARNESS CONNECTOR END VIEWS - X100 THROUGH X275)INLINE HARNESS CONNECTOR END VIEWSX226 FUSE BLOCK JUMPER HARNESS TO BRAKE/CLUTCH HARNESS (6J1)
2006 Chevrolet Suburban C1500, 5.3 Z

X226 Fuse Block Jumper Harness to Brake/Clutch Harness (6J1)

2006 Chevrolet Suburban C1500, 5.3 ZSECTION X226 Fuse Block Jumper Harness to Brake/Clutch Harness (6J1)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
GM814659
GM814660
Connector Part Information
  • Harness Type: Brake/Clutch
  • OEM Connector: 15326120
  • Service Connector: 15326120
  • Description: 1-Way F Metri-Pack 800 Series Sealed (BK)
 Connector Part Information
  • Harness Type: Fuse Block Jumper
  • OEM Connector: 15326119
  • Service Connector: 89046877
  • Description: 1-Way M Metri-Pack 800 Series Sealed (BK)
Terminal Part Information
  • Terminated Lead: Not Serviced
  • Release Tool: Not Available
  • Diagnostic Test Probe: Not Available
  • Terminal: Not Serviced
  • Core/Insulation Crimp: Not Serviced
 Terminal Part Information
  • Terminated Lead: Not Serviced
  • Release Tool: Not Available
  • Diagnostic Test Probe: Not Available
  • Terminal: Not Serviced
  • Core/Insulation Crimp: Not Serviced
X226 Fuse Block Jumper Harness to Brake/Clutch Harness (6J1)

Pin Wire Circuit Function Pin Wire Circuit Function
1 8 BK 450 Ground 1 8 BK 450 Ground
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.